Step 1

Insert Feed Tube
A. Feed tubing as far as possible down into the pipe along the inside of your salt brine tank. This allows our liquid to drip directly into the salt water.
B. Be sure not to cut-off the extra tubing because the excess will be needed later on.

Step 2

Add Crystal Clean Concentrate To Gallon Bottle
Use the enclosed sizing chart to determine how much Crystal Clean Concentrate you should add to the gallon bottle.

Step 3

Fill With Distilled Water
Add distilled water to the one gallon jug, filling it the rest of the way to the top. This diluted mixture will last exactly 4 months. Use your soft water after the first four month's treatment with Crystal Clean.

Step 4

Insert Tube Into Bottle
Feed the tube with the cap into the one-gallon bottle and screw on tight. Be sure to position the tubing so it is as close to the bottom of the bottle as possible. Position the jug so it is out of the way.

Step 5

Mount The Pump
Mount the pump on the outside of your brine tank (or to the outside of your all-in-one softener) with the included high-strength velcro tape. Be sure to secure the excess tubing without cutting the slack because you will need that slack in the years to come.

Step 6

Plug in the Pump
Plug the pump into any standard wall outlet. Our auto-dispenser runs 24/7, so installing the pump is very easy because it does not need to be hard-wire installed. This pump will empty your one-gallon container in exactly 4 months.